| | |
| | | Information Resource
Click on a button for further information about this product |
| |
| | |
High performance trowel applied epoxy floor screed
Description
RonaFloor Epoxy Floor Mortar is a high performance epoxy resin screed for repairing existing floors and providing new wearing surfaces. Its formulation allows thin section application from 5mm. It is suitable for forming coves, skirtings and upstands.
It offers good mechanical resistance and will resist attack from most industrial chemicals including acids, alkalis, oils, fats, solvents and foodstuffs. Surfaces laid or repaired with RonaFloor Epoxy Floor Mortar can be accessed by foot traffic after 10-12 hours and by heavy loads after 16 hours (at 20°C). RonaFloor Epoxy Floor Mortar has been designed for ease of use and practicality of application.
Uses
-
High strength thin bonded patch repairs and
resurfacing in heavy duty high demand flooring
applications
-
Factories, warehouses, ramps, bunds, chemical and food processing areas
-
Suitable for forming and repairing screeds to meet the Heavy Duty category of BS8204: Part 6: 2001
| |
Benefits
-
Resin rich formulation
-
Good chemical resistance
-
Easy to clean
-
Rapid strength development
-
Impermeable to water
-
Can be used in conjunction with RonaFloor Epoxy DPM
Project references include:
Royal and Sun Alliance
Local Government buildings
Ford Motor Company
Littlewoods
Specification Clause
The wearing screed / screed repair shall be RonaFloor Epoxy Floor Mortar by Ronacrete Ltd, tel. +44 (0) 1279 638700. The screed shall be laid at a 5-50mm thick (or state thickness). The primer is to be RonaFloor Epoxy Primer. All materials to be applied in accordance with manufacturers instructions.
|
Preparation
Mechanically prepare substrate in accordance with BS8204: Part 6: 2001. Provide structurally sound and clean substrate to receive high strength screed.
Primer
Prime the surface with RonaFloor Epoxy Primer.
Mixing
Mix using a forced action mixer. If using a drill and paddle mixer use Ronacrete Mixer Attachment C2.
Installation
Trowel apply screed onto tacky primer. Finish with float or trowel.
Packaging
RonaFloor Epoxy Floor Mortar is supplied in 5kg and 25kg packs.
RonaFloor Epoxy Primer is supplied in 2.25kg and 4.5kg packs.
Shelf Life And Storage
Shelf life 9 months. Store in a cool dry place. Protect from frost.
Health And Safety
Protective clothing such as goggles, overalls and gloves is recommended to prevent any effect from prolonged skin contact, inhalation or ingestion. Refer to Health and Safety Data Sheet.
Site AttendanceWhen on site Ronacrete representatives are able, if asked, to give a general indication of the correct method of installing a Ronacrete product. It is important to bear in mind that Ronacrete Ltd is a manufacturer and not an application contractor and it is therefore the responsibility of the contractor and his employer to ensure he is aware of and implements the correct practices and procedures to ensure the correct installation of the product and that liability for its correct installation lies with the contractor and not with Ronacrete Ltd. |
Other Products in the Resin Flooring Range
Ronacrete Curing Membrane
RonaFloor Concrete Dustproofer
RonaFloor Epoxy DPM
RonaFloor HB100
RonaFloor HB200
RonaFloor HB Vertical Grade
RonaFloor PU Coating
RonaFloor PU Coating WB
RonaFloor Repair 1 Hour 2-6mm
RonaFloor Repair 1 Hour 6-50mm
RonaFloor Repair 1 Hour 25mm+
| |
Technical Data @ 20ºC
|
Min / max thickness
|
|
5mm / 50mm
|
|
Full Chemical Resistance
|
|
6 days
|
|
Compressive Strength
|
|
70N/mm² at 28 days
|
|
Flexural Strength
|
|
30N/mm² at 28 days
|
|
Yield
|
|
96 x 25kg packs per m³
|
GuaranteeRonacrete products are guaranteed fit for purpose and of merchantable quality. Materials are supplied subject to our standard Terms and Conditions of Sale, available on request. Additional details on the Insurance Backed Warranty can be provided by our Technical Department. |
Technical Service and SupportRefer to full technical data sheet; this document is a summary only. Ronacrete provide free technical advice and support during design and installation of all systems for flooring, concrete repair, bonding, bedding and waterproofing. If you need any further information or a full technical data sheet contact the Ronacrete Technical Department on +44 (0) 1279 638 700. |
|
Disclaimer
The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using, customers are advised to check with Ronacrete Ltd, quoting the reference number, that they possess the latest issue. Any person or company using the product without first making further enquiries as to the suitability of the product for the intended use does so at his own risk, and Ronacrete Ltd can accept no responsibility for the performance of the product, or for any loss or damage arising out of such use. All data shown are typical laboratory results achieved in ideal conditions; site results may differ.